Compensation Tab

Sensor x Compensation;

default := 0;
Use the up and down buttons to increase or decrease this value. The value you see here will be added to the Sensor x temperature readout, You can use this to make the Temperature output equal to of your Bios.

If you do not know what to add then run the program for a while the Temperature is stable, then write this temperature down (value X for this example). Next go into your PC’s BIOS and write down the value it shows. Next do the following calculation: Y-X=. The value you now get is the value you should use as Compensation Value.

Values to add per CPU (13-1-99)

AMD K5 PR133 +8
AMD K5 PR166 +17
AMD K6 PR166 +7
AMD K6 PR200 +7
AMD K6 300 3DNOW +8
AMD K6 PR233 +20 (Asus TX97-E)
AMD K6 300 +20 (Asus TX97-X - Bios 0108)
Cyrix M2 PR200 +15
IDT C6 +20
Intel P54C +32
Intel P55C + 22

Thanks go to Wolfgang Wiegel, Jerome Tan Marcus Dobel and Lars Gusewski.

If you have any other values please mail them to me at darkside@euronet.nl

Calibration value for the FanTemp on Fan x;

default := 1,00;
Press this button only if you have a FanTemp and you have it in calibration mode. In this line you will also see the calibaration value